These CNC machined cast steel spindles allow the front end of the early Pontiac Fiero to be lowered by 2" without sacrificing proper suspension geometry or ride quality. The 2" drops intended for kit car conversions, they may work on stock Fieros but it may require more careful attention to the choice of wheels and tires for good wheel well clearance. These spindles should also work well with unmodified Fiero cars. We have not personally confirmed it, but are told that these spindles also fit the later model Avanti cars.
The spindles require no other new hardware to install onto the suspension, unless the hardware on the car has corroded. No changes to the springs or shocks are required. All the fasteners needed to install this are already on the car. This kit includes wheel bearings, seals and studs, preinstalled.
To get maximum benefit, this kit requires a rotor, new calipers and new caliper mount brackets. The caliper mount brackets should be the kind that mounts to the outside face of the original Fiero Knuckle. A popular choice is to use the rear LaBaron rotors and the existing brackets designed to work with that rotor.
The spindles are CNC machined cast steel. We offer hubs made from 6061 aluminum, with up to two hole stud patterns of your choice. Because of the custom nature of hole patterns, there may be a week delay before shipping.
The hubs and spindles in this kit are designed together as a custom tuned assembly using heavier duty A-3 and A-6 wheel bearings versus the original stock bearings. Unfortunately, they cannot be sold or used separately, the hub will not work on any other spindle.
<p>These <span class="caps">CNC</span> machined cast steel spindles allow the front end of the early Pontiac Fiero to be lowered by 2” without sacrificing proper suspension geometry or ride quality. The 2” drops intended for kit car conversions, they may work on stock Fieros but it may require more careful attention to the choice of wheels and tires for good wheel well clearance. These spindles should also work well with unmodified Fiero cars. We have not personally confirmed it, but are told that these spindles also fit the later model Avanti cars.</p>
<p>The spindles require no other new hardware to install onto the suspension, unless the hardware on the car has corroded. No changes to the springs or shocks are required. All the fasteners needed to install this are already on the car. This kit includes wheel bearings, seals and studs, preinstalled.</p>
<p>To get maximum benefit, this kit requires a rotor, new calipers and new caliper mount brackets. The caliper mount brackets should be the kind that mounts to the outside face of the original Fiero Knuckle. A popular choice is to use the rear LaBaron rotors and the existing brackets designed to work with that rotor.</p>
<p>The spindles are <span class="caps">CNC</span> machined cast steel. We offer hubs made from 6061 aluminum, with up to two hole stud patterns of your choice. Because of the custom nature of hole patterns, there may be a week delay before shipping.</p>
<p>The hubs and spindles in this kit are designed together as a custom tuned assembly using heavier duty A-3 and A-6 wheel bearings versus the original stock bearings. Unfortunately, they cannot be sold or used separately, the hub will not work on any other spindle.</p>2009-03-10T15:19:11-04:00fiero-2-steel-drop-spindles-hub-upgrade5680932Fiero / Kit Car2009-03-10T15:19:11-04:00Fiero 2" steel drop spindles / hub upgrade2009-06-22T10:57:24-04:00Street Dreams By RossFiero, Fiero V8, kit car, streetrod, suspension2009-03-10T15:19:11-04:00manual907216409552deny1Pair1799.005680932EFSDS050Pair2009-06-25T15:02:38-04:002009-03-10T15:19:11-04:0012034882156809322009-03-10T15:19:11-04:00http://cdn.shopify.com/s/files/1/0020/8752/products/Fiero_2_inch_drop_knuckle.jpg?1258728812